| Product Testing |
| ① |
Water-proof testing |
With waterproof seal design and meet IP55/IP65 standards. Can be used even in raining and snowing weather. |
| ② |
Vehicle run over testing |
Test each charging cable for impedance resistance, high voltage, open / short. |
| ③ |
Burn-in aging testing |
High-voltage real usage testing for 6 hours for each charger. |
| ④ |
ATE platform |
Systematic testing for over / under voltage, Over / under current, CC/CP communication, RCD, leakage protect, grounding. |
|
|
 |
| ⑤ |
Temperature rise testing |
Terminal temperature rise: <50K. |
| ⑥ |
Comprehensive testing |
Test each charging cable for impedance resistance, high voltage, open / short. |
| ⑦ |
Automatic plug testing |
Mechanical life: no load plug in / pull out >10000 times. |
| ⑧ |
Tension testing |
Coupled insertion force: >45N <80N. |
|
|
 |
| ⑨ |
Salt spray chamber |
Mainly test the metal surface corrosion performance of connector. |
| ⑩ |
Air-leakage detector |
Test waterproof effect of the products. |
| ⑪ |
Wire bending testing machine |
The swing parts move left and right at an angle of 90°; cyclic bending to test the bending resistance of the jack and conductor of the cable. |
| ⑫ |
Glow wire tester |
Test the stability of electrical products, parts at high temperatures can not ignite or ignite other parts. |
| |
|
 |
| ⑬ |
Constant temperature & humidity box |
Simulated outdoor environment: high temperature, low temperature and humidity staggered cycletest to verify the service life of the product in different environments. |
| ⑭ |
Tracking test Apparatus |
Detect the failure of the insulating material itself or the insulating function caused by the conductive substances deposited on the surface. |
| |
|
 |
| ⑮ |
Adhesion tester |
Test adhesion power or detaching force of the PC plate on the product. |
| ⑯ |
RCD tester |
Test leakage respond speed and leakage respond value of leakage protection designed in the charger. |
|
|
 |
| ⑰ |
Swing box tester |
To simulate in the process of product packaging and transportation whether the product is damaged, scratched, or the inner box is damaged during transportation. |
| ⑱ |
Wire flexure testing machine |
Use to test the bending resistance of wire. |
| |
|
 |
| ⑲ |
Aging test |
The specimen is subjected to 136°C for 168 hours. Heat aging resistance is assessed by the change in tensile strength before and after aging (≤30%). |
| ⑳ |
Oil resistance aging test |
The European standard wire is tested at 100±2°C for 168 hours, while the American standard wire is tested at 60±2°C for 168 hours, to inspect the specimen for any damage. |
| |
|
 |
| ㉑ |
Digital measuring projector |
Measuring wire jacket / insulation thickness and eccentricity. |
| ㉒ |
Core wire withstand voltage test |
A set high voltage is applied to rigorously test the insulation strength of the wire, ensuring that the product will not suffer breakdown or electric leakage during use. |
| |
|
 |
