This selector covers ShinCharge's Mode 3 AC type 2 to type 2 charging cable range, where one V3 family splits into four rated builds across 16A and 32A in single-phase and three-phase. Use it to match a project's supply phase, current and run length to one exact model number, so a team sourcing a type 2 to type 2 ev charging cable can specify cable, certificate set and length on a single line.
Written for procurement engineers, installer and EPC buyers, and distributor category managers who specify at volume and need a defensible SKU.
Start from the electrical supply, not the cable. Phase and rated current determine the model number, and the model number determines the rated power you can quote.
| Supply phase | Rated current | Recommended model | Rated power | Typical deployment |
|---|---|---|---|---|
| 1-phase | 16A | V3-16S | 3.5 kW · AC 250V | Light AC points, home and small commercial bays |
| 1-phase | 32A | V3-32S | 7 kW · AC 250V | Residential setups and workplace charging |
| 3-phase | 16A | V3-16T | 11 kW · AC 480V | Workplace and retail parking with balanced load |
| 3-phase | 32A | V3-32T | 22 kW · AC 480V | Fleet operations and public AC charging bays |
Not sure which build fits the project? Send us the phase, current and run length and we will confirm the model number and the certificate set for your destination market.
Every V3 cable carries its own model number and cable specification marking, and ships in the labelled packaging case shown below. That marking is what lets an installer, an EPC buyer and a distributor confirm they are holding the same rated build.
| Parameter | V3-16S | V3-32S | V3-16T | V3-32T |
|---|---|---|---|---|
| Rated voltage | AC 250V | AC 250V | AC 480V | AC 480V |
| Rated current | 16A | 32A | 16A | 32A |
| Charging phase | 1-phase | 1-phase | 3-phase | 3-phase |
| Rated power | 3.5 kW | 7 kW | 11 kW | 22 kW |
| Executive standard | IEC 62196 Type 2 | |||
| Protection rank | IP65 | |||
| Jacket | TPU jacket for lifetime protection | |||
| Dust cap | Silicone dust-proof cap, attached on tail | |||
| Regular length | 5M / 7M / 10M — custom lengths available | |||
| Certificates | TUV-Mark, CB, CE, RoHS, UKCA, REACH | |||
| Connector life | Exceeding 10,000 mating cycles, with connector components precision-built to exceed coupling force requirements | |||
| Marking | Model No. and cable specification | |||
| Customisation | Custom lengths, colours and logo printing available | |||
The V3 product detail lists six compliance items. Each one answers a different question, and a distributor shipping into several markets usually needs more than one on the same datasheet.
A third-party certification mark issued after independent testing. Buyers use it when a project owner or tender requires evidence beyond self-declaration.
A CB test certificate supports national approvals in participating countries, which shortens re-testing when a cable is added to a new market's catalogue.
Conformity marking for placing the cable on the EU market. Purchasing teams normally ask for the CE entry alongside the TUV-Mark entry.
Confirms the cable meets restrictions on hazardous substances in electrical and electronic equipment, a standard line in most EU procurement checklists.
The conformity marking used for the Great Britain market, relevant when a distributor serves both EU and UK sales channels.
Covers the EU chemical substances framework. Often requested by buyers who must submit a substance declaration with their own product file.
Four decisions turn a standard V3 cable into a project-ready line item: length, colour, branding and packaging.
Regular lengths are 5M, 7M and 10M, with custom lengths available. Choose the length from the parking geometry, not the vehicle, so a shared bay works for every user.
The TPU jacket is specified for lifetime protection, giving the mechanical strength and environmental resistance an outdoor or semi-exposed bay needs.
A silicone dust-proof cap is attached on the tail so it stays with the cable, keeping the connector free of dust and water between charging sessions.
Custom colours and logo printing are available, alongside the standard double colour design, for distributors building a private-label accessory line.
The page states connector components exceed coupling force requirements with a lifespan exceeding 10,000 cycles, which sets the maintenance assumption for high-traffic bays.
Because the model number and cable specification are marked on the product, mixed fleets can verify each cable on site without opening a purchase file.
ShinCharge lists commercial EV parking facilities, public charging stations, residential setups, fleet operations and workplace charging as the intended applications. Each one resolves to a different V3 build.
| Deployment scenario | Buyer decision that drives the spec | Recommended V3 build |
|---|---|---|
| Residential setup | Single-phase domestic supply, overnight charging, cable hung on a wall bracket | V3-32S · 32A · 7 kW · 5M |
| Workplace charging | Three-phase supply shared across bays, driver dwell time of several hours | V3-16T · 16A · 11 kW · 5M or 7M |
| Commercial EV parking facilities | Mixed single- and three-phase feeds across a site; standardising on one jacket and marking | V3-32S and V3-16T mixed per bay |
| Fleet operations | High throughput, repeated coil-and-deploy cycles, fast turnaround between vehicles | V3-32T · 32A · 22 kW · 7M |
| Public charging stations | Weather exposure, connector care between users, long-reach parking bays | V3-32T · 32A · 22 kW · 10M |
Two facts decide most of these rows: the supply phase available on site and the rated power the charger can deliver. Confirm both before fixing the cable length. Ask our team to check a mixed-site BOM.
The V3 cable is supplied through an inquiry and quotation path rather than a direct checkout, which is what a B2B order process needs. Bring your specification and the quote covers the rest.
Share the supply phase, rated current, run length, jacket colour and required certificates. You will get a model number from the V3 table, the matching specification, and pricing for your volume. Reach the team through the contact page to start the quotation.
Keep adjacent product options together for a faster catalog comparison.
Model B1 Portable EV Charger features interchangeable connectors supporting Type 1, Type 2, NACS and GB‑T standards. Flexible power options of 3.5KW, 7KW, 9KW deliver reliable AC c
View product
wall mounted ev charger offering scalable, 7KW-22KW power delivery. Trusted by wall charger suppliers, our IP65-rated units ensure professional, certified safety.
View product
use v3-32t: 3-phase, 32a, rated ac 480v and 22 kw. for an 11 kw three-phase supply choose v3-16t. for single-phase supplies choose v3-32s at 7 kw or v3-16s at 3.5 kw.
the product detail lists tuv-mark, cb, ce, rohs, ukca and reach. confirm the exact certificate set required for your destination market when you request a quotation.
regular lengths are 5m, 7m and 10m, and custom lengths are available. the cable uses a tpu jacket, and a silicone dust-proof cap is attached on the tail.
yes. the product page states that custom lengths, colours and logo printing are available for oem work. share artwork, target length and volume so the quotation reflects the exact configuration.
the cable is rated ip65 for dust and water ingress protection. the page also states that connector components exceed coupling force requirements with a lifespan exceeding 10,000 mating cycles.
the v3 is an iec 62196 type 2 to type 2 cable, so it links a type 2 charging point to a type 2 vehicle inlet. the page describes compliance with iec 62196 and support for single-phase and three-phase charging modes. confirm the vehicle inlet and the charger socket rating before ordering.
